Chapter 7. Appendix

Preventing afterimage burn-in

The best way to protect the product from afterimage burn-in is switching the power off or setting the PC or system to run a screen saver when not in use. Also, Warranty

109

Regular Text colour Change

Use bright colours of similar brightness.

Interval: Change text colour and background colour every 30 minutes.

service may be limited depending on instruction guide.

• Powering Off, Screen Saver and Power Saving Mode

‒ Power off the product for 2 hours after using it for 12 hours.

‒ Go to Display Properties > Power Supply on your PC and set the product to power

off as required.

‒ Using a screen saver is recommended.

It is best to use a single-colour or moving-image screen saver.

• Regular colour change

FLIGHT : TIME

OZ348 : 20:30

FLIGHT : TIME

OZ348 : 20:30

FLIGHT : TIME

OZ348 : 20:30

FLIGHT : TIME

OZ348 : 20:30

‒ Use 2 colours.

Switch between 2 colours every 30 minutes as shown above.

‒ Move and change text every 30 minutes as shown below.

FLIGHT : TIME

Type 1

FLIGHT

TIME

OZ348

20:30

UA102

21:10

Type 2

 

 

 

 

 

 

FLIGHT

 

TIME

 

 

 

 

 

 

 

OZ348

 

20:30

 

 

 

 

 

 

 

UA102

 

21:10

 

 

 

 

 

 

OZ348 : 20:30

[ Step 1 ]

[ Step 2 ]

FLIGHT : TIME

Avoid combinations of a text colour and background colour of contrasting brightness. (Brightness: refers to the lightness or darkness of a colour which varies depending on the amount of light emitted.)

Avoid using grey as it may contribute to afterimage burn-in.

Avoid using colours of contrasting brightness (black and white; grey).

FLIGHT

:

TIME

FLIGHT

:

TIME

OZ348

:

20:30

OZ348

:

20:30

OZ348 : 20:30

[ Step 3 ]

Regularly display a moving image along with a logo.

Interval: Display a moving image along with a logo for 60 seconds after using for

4 hours.

Page 109
Image 109
Samsung LH55MLEPLSC/NG, LH32MLEPLSC/NG manual 109, Preventing afterimage burn-in