![](/images/new-backgrounds/1274756/274756189x1.webp)
Chapter 6. Troubleshooting
Checkpoints
95
Installation issue (PC mode)
The screen keeps switching on and off. | Check the cable connection between the product and PC, and ensure the connection is secure. | |
|
| |
Blank spaces are found on all four sides of the screen | The blank spaces found on the screen have nothing to do with the product. | |
when an HDMI or |
| |
Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem, adjust the screen size in | ||
product and PC. | ||
the HDMI or DVI settings for the graphics card. | ||
| ||
|
| |
| If the graphics card settings menu does not have an option to adjust the screen size, update the graphics card driver | |
| to the latest version. | |
| (Please contact the graphics card or computer manufacturer for further details about how to adjust the screen | |
| settings.) | |
|
| |
PC is shown in Source when a PC is not connected. | PC is always shown in Source irrespective of whether or not a PC is connected. | |
|
|
Screen issue
The power LED is off. The screen will not switch on. | Check the cable connection between the product and PC, and ensure the connection is secure. |
|
|
No Signal is displayed on the screen. | Check that the product is connected correctly with a cable. |
|
|
| Check that the device connected to the product is powered on. |
|
|
Not Optimum Mode is displayed. | This message is displayed when a signal from the graphics card exceeds the product’s maximum resolution and |
| frequency. |
|
|
| Refer to the Standard Signal Mode Table and set the maximum resolution and frequency according to the product |
| specifications. |
|
|
The images on the screen look distorted. | Check the cable connection to the product. |
|
|
The screen is not clear. The screen is blurry. | Adjust Coarse and Fine. |
|
|
| Remove any accessories (video extension cable, etc) and try again. |
|
|
| Set the resolution and frequency to the recommended level. |
|
|