Chapter 2.
Precautions for using DP
•To increase the standby power capacity, the product stops DP communication when it is turned off or in power saving mode.
If the product in dual monitor mode is turned off or goes into power saving mode, monitor setting changes may not be updated. As a result, screen output may not be displayed properly.
In the occurrence of this issue, set Max. Power Saving to Off before using the product.
•Some graphics cards that are not compliant with the DP standard may prevent the Windows Booting/Bios screen from being displayed when the product is in power saving mode. If this is the case, make sure to turn on the product first before turning on your PC.
•The DisplayPort interface (DP IN) on the product and the provided DP cable are designed based on the VESA standards. Using a DP cable that is not VESA compliant may cause the product to function improperly. Samsung Electronics shall not be held responsible for any issues from using a cable that is not VESA compliant.
Make sure to use a DP cable that is VESA compliant.
35
AV connection
•Do not connect the power cable before connecting all other cables.
•Ensure you connect a source device first before connecting the power cable.
•You can connect a video device to the product using a cable.
‒Connecting parts may differ in different products.
‒Press the SOURCE button on the remote control to change the source.
Connection using an
The appearance may differ depending on the product.
•Audio will not be enabled if the product is connected to a video device using an
•After connecting a video device to the product with an