Samsung MC455THRCSR/SG manual Installing Your Microwave Oven, Setting the Time

INSTALLING YOUR MICROWAVE OVEN

Place the oven on a flat level surface 85 cm above the floor. The surface should be strong enough to safely bear the weight of the oven.

	1.	When you install your oven, make sure there is	20 cm	10 cm
		adequate ventilation for your oven by leaving at least	above	behind
ENGLISH		10 cm (4 inches) of space behind and, on the sides
		of the oven and 20 cm (8 inches) of space above.	85 cm of	10 cm on
			the floor	the side
	2.	Remove all packing materials inside the oven.
		Install the roller ring and turntable.
		Check that the turntable rotates freely.
	3.	This microwave oven has to be positioned so that plug is accessible.

If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

For your personal safety, plug the cable into a 3-pin, 230 Volt, 50 Hz, AC earthed socket. If the power cable of this appliance is damaged, it must be replaced by a special cable.

Do not install the microwave oven in hot or damp surroundings like next to a traditional oven or radiator. The power supply specifications of the oven must be respected and any extension cable used must be of the same standard as the power cable supplied with the oven. Wipe the interior and the door seal with a damp cloth before using your microwave oven for the first time.

SETTING THE TIME

Your microwave oven has an inbuilt clock. When power is supplied, “:0”, “88:88” or “12:00” is automatically displayed on the display.

Please set the current time. The time can be displayed in either the 24- hour or 12-hour notation. You must set the clock:

• When you first install your microwave oven

• After a power failure

Do not forget to reset the clock when you switch to and from summer and winter time.

Auto energy saving function

If you do not select any function when appliance is in the middle of setting or operating with temporary stop condition, function is canceled and clock will be displayed after 25 minutes.

Oven Lamp will be turned off after 5 minutes with door open condition.

1.Press the Clock button.

2. Turn the Multi Function Selector Dial to set time display type. (12 H or 24 H)

3. Press the Multi Function Selector Dial to complete the setup.

4. Turn the Multi Function Selector Dial to set the hour.

5. Press the Multi Function Selector Dial.

6. Turn the Multi Function Selector Dial to set the minute.

10

MC455THRCSR_SG_DE68-03349G-04_EN.indd 10

2014-08-18 ￿￿ 4:17:04