Reinstalling Printer Software | Samsung ML-1615 specs

Reinstalling Printer Software

You can reinstall the software if installation fails.

1Start Windows.

2From the Start menu select Programs or All Programs → your printer driver name → Maintenance.

Or place the CD-ROM into the CD-ROM drive.

3Select Repair.

You will see a component list so that you can reinstall any one item individually.

NOTE: If your printer is not already connected to the computer, the following window will appear.

•After connecting the printer, click Next.

•If you don’t want to connect the printer at this time, click Next, and No on the following screen. Then the installation will start and a test page will not be printed at the end of the installation.

•The reinstallation window that appears in this User’s Guide may differ depending on the printer and interface in use.

4Select the components you want to reinstall and click Next.

If you select Printer, the window asking you to print a test page appears. Do as follows:

a.To print a test page, select the check box and click Next.

b.If the test page prints out correctly, click Yes. If it doesn’t, click No to reprint it.

5When the reinstallation is done, click Finish.

Removing Printer Software

1Start Windows.

2From the Start menu select Programs or All Programs → your printer driver name → Maintenance.

Or place the CD-ROM into the CD-ROM drive.

3Select Remove.

You will see a component list so that you can remove any one item individually.

4Select the components you want to remove and then click Next.

5When your computer asks you to confirm your selection, click Yes.

The selected driver and all of its components are removed from your computer.

6After the software is removed, click Finish.

5

Installing Printer Software in Windows

Image 88

Samsung ML-1615 manual Reinstalling Printer Software, Removing Printer Software

Contents

ML-1610 Series About the User’s Guide Contact Samsung World Wide Latvia Contents Cleaning the Outside Cleaning the Inside Redistributing Toner Replacing the Toner Cartridge Important Precautions and Safety Information 17SAVE These Instructions Environmental and Safety Consideration Ozone Safety Radio Frequency Emissions Declaration of Conformity European Countries Page Introduction Special Features You can print at 600 dots per inch dpiUp to 16 ppm in A4 17 ppm in Letter You can print in Windows 98/Me/2000/XP Printer Driver Features Feature Printer Driver Printer Components Front View Rear View On Line/Error and Toner Save LEDs See Troubleshooting Error Messages onUnderstanding the Control Panel Description Cancel button Function Description Setting Up Your Printer Paper Cover a UnpackingComponents may differ from one country to another Carefully remove all of packing tape from the printer Selecting a LocationClearance Space Installing the Toner Cartridge Grasp the front cover and pull it toward you to open Setting UP Your Printer Setting UP Your Printer Loading Paper You can load approximately 150 sheets of paper in the tray Load paper with the print side facing up Connecting a Printer Cable Turning the Printer on Demo page shows the printer’s current configuration Printing a Demo System Requirements Installing Printer SoftwareVarious Linux See Software User’s Guide Setting UP Your Printer Using Print Materials Choosing Paper and Other Materials Type and Capacities Guidelines for Paper and Special MaterialsPaper Type Capacitya Plain paper Only use labels recommended for laser printers Using Print Materials Using the Tray Verifying the Output Location Using Manual Feed Mode Repeat this step for every page to be printed Printing on Special Materials Using Print Materials There are two ways to cancel a print job Canceling a Print JobPress the Cancel button on the control panel Double-click this icon to view Queue of the print jobs Maintaining Your Printer Maintaining the Toner Cartridge Toner cartridge storage Redistributing Toner Maintaining Your Printer Using the Toner Save Mode Replacing the Toner Cartridge Cleaning the Outside Cleaning the PrinterCleaning the Inside Cleaning inside the printer Maintaining Your Printer Consumables and Replacement Parts Items Yield AverageTransfer Roller Pick-up Roller Solving Problems Check Solution Troubleshooting ChecklistLine/Error LED is on Solving General Printing Problems Problem Possible Cause Solution Software User’s Guide. Try printing a Garbled, or Text is wrongBut are blank Defective or out Toner Clearing Paper Jams Paper Exit Area Solving Problems Paper Feed Area Around the Toner Cartridge Print Quality Checklist Solving Print Quality ProblemsTips for Avoiding Paper Jams Solving Print Quality Problems Print Scratched. Install a new toner cartridge Dirty. Clean the LSU. See Cleaning the Inside on4.6. Contact your service representative Change to a lighter weight pages. See Paper Problem Solution Wrinkles or Black pages Curl Poor Image quality LED pattern Possible Problems and Solutions Troubleshooting Error MessagesToner cartridge and install a new one. See Common Windows Problems Problem Possible Cause and SolutionFile in Use message Appears during Common Linux Problems /etc/printcap file Memory usage Am trying to print a Rotated and croppedThat would result in a cropped output White nothing is Errors Owning the spooler daemon On my PCL or SPL Error messages printingYour software vendor to inform them of the issue Able to print Specifications Printer Specifications Paper Specifications Specifications and Description Printer Specifications80 % RH Paper Specifications Overview Supported Sizes of Paper Size mm/in.a Weight Capacityb60 to 165 g/m2 bond 16 to 43 lb Maximum size Legal Guidelines for Using Paper Symptom Problem with Solution Paper Paper Specifications Category SpecificationsPaper Output Capacity Output Tray Capacity Printer and Paper Storage Environment Index USB cable, connect Software User’s Guide Installing Printer Software in Windows Using Status Monitor Installing Printer Software in Windows Installing Printer Software in Windows Choose the type of installation Changing the Software Language Reinstalling Printer Software Removing Printer Software Basic Printing Printing a DocumentSelect your printer driver from the Name drop-down list Printer Settings Layout TabOrientation Layout Options Paper Tab CopiesSize Scaling Resolution Toner Save ModeGraphics Tab Darkness About Tab Extras TabPrinter Tab Using a Favorite Setting Using Help Advanced Printing Printing Multiple Pages on One Sheet of Paper N-Up Printing Printing Posters Printing a Reduced or Enlarged Document Using an Existing Watermark Using WatermarksFitting Your Document to a Selected Paper Size Creating a Watermark Editing a WatermarkDeleting a Watermark Watermark section. The Edit Watermark window appears What is an Overlay? Using OverlaysCreating a New Page Overlay Deleting a Page Overlay Using a Page OverlayClick Delete Overlay Setting Up a Host Computer Setting Up a Client ComputerWindows 9x/Me Windows NT 4.0 or higher Using Status Monitor Opening the Troubleshooting Guide→ your printer driver name → Troubleshooting Guide Changing the Status Monitor Program Settings Following window opens Using Your Printer in Linux System RequirementsSupported OS Recommended Capacities Installing the Printer Driver Changing the Printer Connection Method Uninstalling the Printer Driver Using the Configuration ToolSelect Complete uninstall and then click Uninstall Changing Llpr Properties Language, change 4 Layout properties, set Rev