MEDIA TYPE | GUIDELINES |
|
|
Preprinted paper | • Letterhead must be printed with |
| that will not melt, vaporize, or release hazardous |
| emissions when subjected to the machine’s fusing |
| temperature for 0.1 second. Check your machine’s |
| specification to view the fusing temperature, see |
| page 41. |
| • Letterhead ink must be |
| not adversely affect printer rollers. |
| • Forms and letterhead should be sealed in a |
| |
| storage. |
| • Before you load preprinted paper, such as forms |
| and letterhead, verify that the ink on the paper is |
| dry. During the fusing process, wet ink can come off |
| preprinted paper, reducing print quality. |
z
Using photographic paper or coated paper may cause problems, requiring repairs. Such repairs are not covered by Samsung’s warranty or service agreements.
LOADING PAPER
Loading paper in the tray
Load the print media you use for the majority of your print jobs in the tray.
The tray can hold a maximum of 150 sheets of 75 g/m2 (20 lb bond) plain paper.
1.Grasp the paper input tray and pull it toward you to open. Pinch the rear guide and pull it out to extend the tray.
Because the machine is very light, it may be moved when you use it; for example, when opening/closing the tray or installing/removing the toner cartridge. Be careful not to move the machine.
2.Prepare a stack of paper for loading by flexing or fanning them back and forth. Straighten the edges on a level surface.
3.Load paper with the print side facing up. Make sure that all four corners are flat in the tray.
Pay attention not to overload paper. Paper overloading may cause paper jams.
22 _Selecting and loading print media
