Samsung ML-4551ND, ML-4550 manual Installing a network interface card, Removing a DIMM

Models: ML-4550 ML-4551ND

1 112
Download 112 pages 26.94 Kb
Page 63
Image 63
Removing a DIMM

Removing a DIMM

To expand the printer memory to 512 MB, you need to remove the preinstalled 128 MB DIMM and install two 256 MB DIMMs into the DIMM slots.

Push the latches at both ends of the DIMM slot away to remove the DIMM and pull out the DIMM.

1

2

1 latch

2 DIMM

Installing a network interface card

The ML-4551N and ML-4551ND are equipped with wired network interface cards, allowing you to use your printer on a network.

To use the ML-4550 in network environments, you need to buy an optional network interface card. For order information, see page 7.1.

Review the precautions on page 10.1 and then follow this procedure to install a network interface card in your printer.

1Turn the printer power off and unplug the power cord and printer cable from the printer.

2Remove the duplex-slot cover or the duplex unit from the back of the printer.

1

1 duplex-slot cover

3Grasp the control board cover and remove it.

Note

• Knowing the connectors’ name and location will make it easy to install the accessories.

12

1hard disk connector

2wired network connector

10.3 <Installing accessories>

Page 63
Image 63
Samsung ML-4551ND, ML-4550 manual Installing a network interface card, Removing a DIMM