4Align the connector on the hard disk with the connector on the control board. Push the hard disk in until it is latched into place.
5Fasten the four screws supplied with your new hard disk.
6Close the control board cover by aligning the groove on it with the notch on the printer and sliding it.
7Reinstall the
8Reconnect the power cord and printer cable, and turn the printer on.
9Print a configuration page from the control panel to check if the hard disk is correctly installed. See page 8.1.
Setting the hard disk in the printer properties
After installing the hard disk, you need to select it in the printer properties to enable its use. Take the following steps:
1Click the Windows Start menu.
2For Windows 98/Me/NT 4.0/2000, select Settings and then Printers.
For Windows XP/2003, select Printers and Faxes.
3Select the Samsung
4Click the right mouse button on the printer icon and select Properties.
5In PCL 6 Properties, click the Printer tab and then check Optional Hard Disk Drive (HDD).
In PS Properties, click the Device Option or Device Settings tab and set the Optional Hard Disk Drive (HDD) option to Installed.
6Click OK.