Samsung ML-4551ND, ML-4550 Selecting an output location, Printing to the output tray Face down

Selecting an output location

The printer has two output locations; the rear cover (face up) and the output tray (face down).

1

2

1 rear cover

2 output tray

The printer sends output to the output tray by default. To use the output tray, make sure that the rear cover is closed.

Notes

• If paper coming out of the output tray has problems, such as excessive curl, try printing to the rear cover.

•To avoid paper jams, do not open or close the rear cover while the printer is printing.

Printing to the output tray (Face down)

The output tray collects paper face down, in the order in which the sheets were printed. The tray should be used for most print jobs.

Printing to the rear cover (Face up)

Using the rear cover, paper comes out of the printer face up.

Printing from the multi-purpose tray to the rear cover provides a straight paper path. Using the rear cover might improve the output quality with special print media.

To use the rear cover, open it by pulling down and pull the rear cover extension.

Caution

• The fuser area inside the rear cover of your printer becomes very hot when in use. Take care when you access this area.

5.8 <Loading print media>