In the paper feed area
In the tray 1
1Pull the tray 1 open.
2Remove the jammed paper by gently pulling it straight out. Make sure that all of the paper is properly aligned in the tray 1.
If the paper does not move when you pull, or if you do not see the paper in this area, check the fuser area around the toner cartridge. See page 9.3.
3Insert the tray 1 into the printer until it snaps into place. Printing automatically resumes.
In the optional tray
1Pull the optional tray open.
2Remove the jammed paper from the printer.
If the paper does not move when you pull, or if you do not see the paper in this area, stop and go to step 3.
3Pull the upper tray half way out.
4Pull the jammed paper straight up and out.
5Fully insert the trays back into the printer. Printing automatically resumes.
9.2 <Troubleshooting>
