Samsung ML-6060S manual Troubleshooting PS Errors, Problem, Possible Cause, Solution, Installed

Troubleshooting PS Errors

The following situations are PS language specific and may occur when several printer languages are being used.

Note: To receive a printed or screen displayed message when PS errors occur, open the Print Options dialog box and click the desired selection next to the PostScript errors section.

Problem	Possible Cause	Solution
PostScript file can not	The PostScript option may	• Print a configuration page and
be printed.	not be installed, or the	verify that the PS version is
	installed memory may be	available for printing, and that
	insufficient.	total system memory is at least
		12 MB.
		• If PostScript is not available,
		install the PostScript option. See
		“Memory and PostScript SIMMs”
		on page H.2.
		• If system memory is not at least
		12 MB, install an 8 MB SIMM.
		See “Memory and PostScript
		SIMMs”.
“This job contains	The pure binary data	Open the Properties of the
binary data...”	option is not supported by	PostScript driver, click on
message appears.	the PostScript driver.	PostScript, and click on
		Advanced button. The pure
		binary data option is not
		supported. Choose another.
A PS error page	Print job may not be PS.	Make sure that the print job is a
prints.		PS job. Check to see whether the
		software application expected a
		setup or PS header file to be sent
		to the printer.
The optional Tray 2 is	The printer driver has not	Open the PostScript driver
not selected in the	been configured to	properties and set the Option Tray
driver.	recognize the optional Tray	item of Device option to
	2.	Installed.

PROBLEM SOLVING 7.27