Samsung ML-6060N, ML-6060S manual Solving General Printing Problems, PCL 6 or Samsung ML-6060

Solving General Printing Problems

If you have any problems with the operation of your ML-6060 series printer, refer to the table for suggested solutions.

Problem

Possible Cause

Solution

The printer does not print.

The printer is not	If no lights are on, check the power
receiving power.	cord connections. Check the power
	switch and the power source.
Your printer is not	Select Samsung ML-6060 Series
selected as the default	PCL 6 or Samsung ML-6060
printer.	Series PS as your default printer.
Check the printer for	• The printer cover is not closed.
the following:	• Paper is jammed.
	• No paper is loaded.
	• Toner cartridge is not installed.
	• Printer system error occurs.
	Contact a service representative.
The printer may be in	Add paper to the Multi-Purpose tray,
manual feed mode and	and press the Demo button on the
out of paper. (The	printer’s control panel.
Manual and the Data
lights are blinking.)
The connection cable	Disconnect the printer cable and
between the computer	reconnect it.
and the printer is not
connected properly.
The connection cable	If possible, attach the cable to
between the computer	another computer that is working
and the printer is	properly and print a job. You may
defective.	also try using a different printer
	cable.
The port setting is	Check the Windows printer setting to
incorrect.	make sure that the print job is sent
	to the correct port (for example,
	LPT1). If the computer has more
	than one port, make sure the printer
	is attached to the correct one.

7.2 PROBLEM SOLVING