Memory and PostScript SIMMs

3 Locate the PS SIMM slot (the lower slot on the left as shown) and the memory SIMM slot (the upper slot) on the control board. They are not interchangeable.

To install the memory SIMM, continue with Step 4.

To install the PS SIMM, go to Step 6.

4 Hold the memory SIMM so that the notch 1 and the connection point 2 are aligned with the slot as shown, and insert the SIMM all the way into the upper slot labeled DRAM MODULE at a 45 degrees angle.

5 Rotate it up until it snaps into place.

6 Hold the PS SIMM so that the notch 1 and the connection point 2 are aligned with the slot as shown, and insert the SIMM all the way into the lower slot labeled FLASH-ROM MODULE at a 45 degrees angle.

Memory

DRAM MODULE

FLASH-ROM MODULE

PS SIMM

1

 

2

DRAM MODULE

FLASH-ROM MODULE

DRAM MODULE

FLASH-ROM MODULE

1

DRAM MODULE

 

 

FLASH-ROM MODULE

 

2

PRINTER OPTIONS H.3

Page 164
Image 164
Samsung ML-6060N, ML-6060S manual Memory and PostScript SIMMs, Rotate it up until it snaps into place