Samsung ML-6060S, ML-6060N manual Setting Your Printer with the PS Option, Installing PPD Files

Setting Your Printer with the PS Option

If you want to use the PostScript driver to print a document, your printer should have:

•PS SIMM (Option for ML-6060 and ML-6060N. ML-6060S comes with a built-in PS SIMM.)

•12 MB or more RAM. ML-6060 comes with 4 MB RAM, so additional 8 MB or more RAM should be added. (ML-6060N and ML-6060S come with 16 MB RAM, so additional RAM is not required.)

For instructions on installing the printer options, see Appendix H, “Printer Options.”

Installing PPD Files

PPDs, in combination with the PostScript driver, access the printer features and allow the computer to communicate with the printer. An installation program for the PPDs is provided on the ML-6060 CD-ROM.

Notes:

•Installing the PostScript printer driver may require the use of the operating system files on the original CD-ROM or diskette that came with your system.

•If you have a PostScript level 3 driver and want to use it, you must install the PostScript level 3 PPD which is also provided on the ML-6060 series CD-ROM.

1Before installing PPD files, make sure that the printer and the PC are properly connected with parallel, USB, or optional network interface. For information on:

•Connecting with parallel interface, see page 2.7.

•Connecting with an USB interface, see Appendix B, “Using Your Printer with a USB Cable.” To use the USB interface, you must also install the USB port driver.

•Connecting with an optional network interface, see Appendix F, “Using Your Printer on a Network.”

USING WINDOWS POST SCRIPT DRIVER E.1