Italy, Latvia, Lithuania, Luxembourg, Malta, The Netherlands, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden and the U.K.

EEA/EFTA countriesIceland, Liechtenstein, Norway and Switzerland

European States with restrictions on use:

EUIn France, the frequency range is restricted to 2446.5-2483.5 MHz for devices above 10 mW transmitting power such as wireless

EEA/EFTA countriesNo limitations at this time.

Regulatory Compliance Statements

Wireless Guidance

Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in your printer system. The following section is a general overview of considerations while operating a wireless device.

Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections). The wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label. If the country you will be using the wireless device in, is not listed, please contact your local Radio Approval agency for requirements. Wireless devices are closely regulated and use may not be allowed.

The power output of the wireless device or devices that may be embedded in your printer is well below the RF exposure limits as known at this time. Because the wireless devices (which may be embedded into your printer) emit less energy than is allowed in radio frequency safety standards and recommendations, manufacturer believes these devices are safe for use. Regardless of the power levels, care should be taken to minimize human contact during normal operation.

As a general guideline, a separation of 20 cm (8 inches) between the wireless device and the body, for use of a wireless device near the body (this does not include extremities) is typical. This device should be used more than 20 cm (8 inches) from the body when wireless devices are on and transmitting.

This transmitter must not be collocated or operation in conjunction with any other antenna or transmitter.

Some circumstances require restrictions on wireless devices. Examples of common restrictions are listed below:

Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless devices to be turned off while

traveling in an airplane. IEEE 802.11 (also known as wireless Ethernet) and Bluetooth communication devices are examples of devices that provide wireless communication.

In environments where the risk of interference to other devices or services is harmful or perceived as harmful, the option to use a wireless device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated. When in environments where you are uncertain of the sanction to use wireless devices, ask the applicable authority for authorization prior to use or turning on the wireless device.

Every country has different restrictions on the use of wireless devices. Since your system is equipped with a wireless device, when traveling between countries with your system, check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination country.

If your system came equipped with an internal embedded wireless device, do not operate the wireless device unless all covers and shields are in place and the system is fully assembled.

Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Please contact manufacturer for service.

Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or contact manufacturer Technical Support for additional information.

Replacing the Fitted Plug (for UK Only)

Important

The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until you have another fuse cover.

Please contact the people from you purchased the machine.

The 13 amp plug is the most widely used type in the UK and should be suitable. However, some buildings (mainly old ones) do not have normal 13 amp plug sockets. You need to buy a suitable plug adaptor. Do not remove the moulded plug.

Warning

If you cut off the moulded plug, get rid of it straight away.

You cannot rewire the plug and you may receive an electric shock if you plug it into a socket.

Important warning: You must earth this machine.

The wires in the mains lead have the following color code:

Green and Yellow:

Earth

Blue:

Neutral

Brown:

Live

If the wires in the mains lead do not match the colors marked in your plug, do the following:

You must connect the green and yellow wire to the pin marked by the letter “E” or by the safety ‘Earth symbol’ or colored green and yellow or green.

You must connect the blue wire to the pin which is marked with the letter “N” or colored black.

You must connect the brown wire to the pin which is marked with the letter “L” or colored red.

You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.

v

Page 11
Image 11
Samsung ML-D1630A manual Regulatory Compliance Statements, Replacing the Fitted Plug for UK Only

ML-D1630A specifications

The Samsung ML-D1630A is a high-quality toner cartridge designed specifically for use with Samsung printers, particularly the ML-1630 series. Known for its reliability and impressive print output, this toner cartridge is a popular choice among both home offices and small businesses.

One of the standout features of the ML-D1630A is its impressive yield. With a capacity of approximately 2,000 pages, this cartridge allows users to print a significant volume of documents before needing a replacement. This feature is particularly advantageous for those who engage in high-volume printing and seek to minimize interruptions in workflow.

The ML-D1630A utilizes laser printing technology, which is renowned for producing sharp, monochrome text and detailed graphics. Laser printers are generally faster than inkjet printers, making the ML-1630 series suitable for users who require rapid print speeds without compromising on quality. The precise laser technology ensures that each printed page is crisp, clear, and professional-looking, ideal for business documents, reports, and presentations.

In terms of compatibility, the ML-D1630A is engineered to work seamlessly with various models within the Samsung ML-1630 range. This compatibility means that users can expect straightforward installation and reliable performance, avoiding issues that may arise with third-party cartridges. Additionally, Samsung's reputation for durability ensures that the cartridge maintains its print quality throughout its entire lifespan.

The cartridge itself is designed with environmentally friendly considerations in mind. Samsung promotes eco-conscious printing solutions, and the ML-D1630A is no exception. The cartridge is often designed for easy recycling, helping users minimize their ecological footprint.

Another notable characteristic of the ML-D1630A is its ability to produce high-quality prints at a cost-effective price point. With a balance of performance and affordability, it provides users with excellent value for money.

In summary, the Samsung ML-D1630A toner cartridge stands out due to its high yield, laser technology, compatibility with Samsung printers, environmental considerations, and cost-effectiveness. Whether utilized in a home office or a small business setting, it consistently delivers reliable performance and outstanding print quality.