Installing Printer Software in Windows
10
• If you do not see your printer on the list, click
Update
to
refresh the list, or select
Add TCP/IP Port
to add your
printer to th e n e twork. To add the printer to the
networ k, enter the p ort name and the IP ad dress for the
printer.
To verify your printe r’s IP addre ss or the MAC add r ess,
print a Network Configuration page.
• To find a shared netwo r k pr in ter (UNC P ath), select
Shared Printer [UNC]
and e n te r the sh ared name
manually or find a shared printer by clicking the
Browse
button.
NOTE
: If you cannot find your machine in network, please turn
off the firewall and click
Update
.
For W indows oper ating system , click
Start
Control Panel
and start windows firewall, and set this option unactivated. For
other operating system, refer to its on-line guide.
TIP
: If you want to set a spe cific IP address on a specific
networ k pr inte r, click the
Set IP Addr es s
button. The Set IP
Address window appears. Do as follows:
a. Select a pr inter to be set w ith a specific IP address from the
list.
b. Configure an IP address, subnet mask, and gateway for the
printer manually and click
Configure
to set the sp ecific IP
address for the ne twork printer.
c. Click
Next
.
You can also set th e ne twork printer via SyncThruTM Web
Service, an embedded web server. Click
Launch SWS
on
Set IP Add ress
window. Y our m achine’s embedded website
opens.
6
Select the components to be installed. After selecting the
components, the following window a ppears. You can also
change the printe r n ame, set the pr in ter to be sh ared on
the ne twor k , set the p rinte r as the d efault printer, an d
change the por t n ame of each p rinter. Click
Next
.
To install this software on a server, select the
Setting up
this printer on a server
checkbox.
7
After the installation is finished, a window appears asking
you to print a test page and to register yourself as a user
of Samsung Printers in order to receive information from
Samsung. If you so desire, select the corresponding
checkbox(es) and click
Finish
.
Otherwise, just click
Finish
.
NOTE
: After setup is complete, if your printer driver doesn’t
work properly, reinstall the printer driver. See “Reinstalling
Printer Software” on page 11.