Samsung NM40TJ0MG9/SEF Q3 I cannot share an Internet connection A1 A2, Check the AP Settings

It may require some time to synchronize the computers to share an Internet connection after the Internet connection sharing configuration is completed. If you cannot share Internet connection even after a longer period, restart the computer.

Check if the connection between the network adapters is configured to bridge. If there is a configured bridge connection between the network adapters through the network configuration wizard, remove the network bridge, and reconfigure the Internet connection sharing.

A bridge connection is created when you ran Network Setup Wizard from the [Network Connections] window, and selected both the internal connection adapter and another adapter in the wizard.

Q3 I cannot share an Internet connection.

A1

A2

Q4 I cannot connect to the AP.

Check the Computer Settings

A1 Verify whether the wireless LAN function of the computer is on by doing the following. If the wireless LAN function is off, turn it on.

-For Windows XP, verify that the wireless network connection has been set to "Enable" in Start > Control Panel > Network Connections.

-When a wireless LAN button is present, verify that the wireless LAN button has been switched on. (Refer to ”Hot Keys” (p 15).)

A2 Verify whether the same network key (encryption key) has been entered in both the AP and the computer.

The network key is an encryption key for encrypting data transmitted between the AP and the computer. It is recommended setting the network key manually.

Check the AP Settings

For the AP settings, refer to the User's Guide provided by the AP manufacturer.

A3 Verify whether the environment is suitable for using a wireless LAN.

The use of a wireless LAN may be restricted according to the environment and distance. Obstacles such as walls or doors affect the use of a wireless LAN. Please install the AP in a high and open location, which is far from the interference of other electric waves.

A4 Verify whether the AP is operating properly.

-When the AP is not operating normally, turn off the AP and after a short while turn it on again.

Troubleshooting 93