Samsung RF28HMELBSR/ML manual Vegetable & Fruit Drawers, To remove

3. Vegetable & Fruit Drawers

To remove

• Simply lift the bin up and pull straight out.

•Tilt up the front of the drawer and pull straight towards you. Then, move the drawer slightly in the direction of the arrow in the illustration below, and then pull out.

4. Flex Zone

-- To remove the Flex Zone : Pull the Flex door out to full extension. Lift the Flex Zone up, pulling it to your body with both hands.

-- To re-install the Flex Zone : Open the Flex door to full extension. Tilt the front of the Flex Zone up, place the back of the Flex Zone onto the rails, and then lower the front until the whole Zone rests on the rails.

If the Flex Zone or LED lighting is not working, check the connectors [ ( 1 ), ( 2 ) shown below ] for cracks or leaks.

(2)

To re-install

• Insert the drawer into the frame rails and push back into place.

• Slide the bin in above the desired location and push down until it stops.

The drawers need to be removed before
CAUTION the glass shelf above them can be lifted
out.	(1)

1. Disassemble the Flex Zone. Refer to page 20 for disassembly instructions.

2. Open the cap cover rail with a flat-blade screwdriver.

3. Examine the connectors.

English - 104

DA68-03055C-01.indb 104 2015. 10. 6.

�� 11:03