USING THE TWO LEVER
DISPENSER
Push the appropriate ice type button to select the type of ice you want dispensed.
Using the ice lever ( 1 )
Push the Ice lever dispenser ( 1 ) gently with your glass. Ice will be released from the dispenser.
Using the Water lever ( 2 )
Push the Water lever dispenser ( 2 ) gently with your glass. Water will be released from the dispenser.
If you push the | 1 |
water and Ice lever nearly | 2 |
simultaneously, the dispenser operates only the option you actually selected or pushed first.
Using the Ice & Water Dispenser together
To get Ice and water, push the Ice lever ( 1 ) first for ice, then move your glass down and press the water dispenser lever ( 2 ) for water.
If you use all the ice at once, you must repeat Steps 2 and 3 on the previous page. However, only wait 8 hours before dispensing the first 4 to 6 ice cubes. This will replenish the ice cubes and ensure maximum ice production.
•To clean the ice bin/bucket, wash CAUTION with a mild detergent, rinse well, and
dry thoroughly it. Do not use harsh or abrasive cleaners or solvents.
•When you select Cubed Ice after using the Crushed Ice mode, a small amount of residual crushed ice might be produced.
Using the Ice Off Function
When you select the Ice Off mode, remove all ice cubes from the bucket. If you leave the ice cubes in the bucket, the ice cubes may clump together, making it difficult to remove them. To remove the ice bucket safely and avoid injury, hold the bottom of the bucket with one hand and the side of the bucket with the other. Then, lift up on the ice bucket, and pull it straight out. To put the ice bucket back in, push it firmly straight back.
If the ice bucket is not pushed firmly into place, ice in the bucket can melt.
If the bucket does not fit, turn the helix 90 degree (see the last illustration on the right, below) and try again.
•Use only the ice maker provided with CAUTION the refrigerator.
•The water supply to this refrigerator must only be installed/connected by a suitably qualified person.
•Connect to a potable water supply only. To operate the ice maker properly, water pressure of 20 ~ 125 psi is required.
operating
English - 97
2015. 10. 6. �� 11:02 |