Required Tools (Not provided)

You need the following tools to complete the installation of your refrigerator:

Philips

Flat-blade screw

Socket wrench

screwdriver (+)

driver (-)

(13/32”) (10 mm)

Pliers

Allen wrench

 

(3/16”) (5 mm)

 

 

 

With the door opened

1.Remove 3 screws holding down the TOP TABLE ( 1 ) and separate the connected wires.

up (1)

setting

2.Disconnect two connectors ( 2 ) on the left side door. To remove the water coupler from the hinge, twist and pull it from the hinge.

Remove the water line ( 3 ) while pressing the marked part ( 4 ) of the water line coupler.

(2)

(3)

(4)

3.Pull and remove the hinge lever ( 5 ). Remove the ground screw ( 6 ) attached to the upper left door hinges with a philips screwdriver (+). Remove the upper left and right door hinges ( 7 ).

(5)

(6)

(7)

English - 19

DA68-03055C-01.indb 19

2015. 10. 6. �� 11:01