LEVELING THE REFRIGERATOR
Make sure the refrigerator is level so that you can make final adjustments.
Use a level to test if the refrigerator is level both side to side and back to front.
If the refrigerator is not level, you will not be able to get the doors perfectly even, which may cause moisture condensation and increased energy bills. Below is an example of how to level the refrigerator if the left side of the refrigerator is lower than the right side.
MAKING MINOR ADJUSTMENTS TO THE DOORS
A leveled refrigerator is necessary for getting the doors perfectly even. For leveling instructions, review the previous section on leveling the refrigerator.
setting up
How to adjust the level
1. | Open the freezer drawer and remove the lower |
| basket. |
2. | Insert a |
| notch on the left control lever, and then turn it |
| |
| turn the lever clockwise to lower the refrigerator |
Fixed part
Adjustment part
and counterclockwise to raise it.) |
The left door is fixed.
To make minor adjustments to the doors, adjust only the right door.
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Control Lever | |||
screwdriver |
|
| ||
Both control levers must be touching the CAUTION floor to avoid possible personal injury or
property damage because of tipping.
If the right side is lower, perform the same procedure, but with the right control lever.
It is difficult to remove the cover leg front from the refrigerator, so we do not recommend making small adjustments with the control lever.
Instead, refer to the next page for the best way to make minor adjustments to the doors.
1.Pull out the Convertible door ( 1 ) to expose the lower hinge ( 2 ).
2.Insert a philips screwdriver (+) ( 3 ) into the shaft ( 4 ) of the lower hinge.
3.Adjust the height by turning a philips screwdriver (+) ( 3 ) clockwise ( DOWN ) or
counterclockwise ( UP ).
(2)
(4)
(1)
(3)(3)
When you turn a philips screwdriver (+)
counterclockwise ( 
), the door will move up.
English - 23
2015. 10. 6. �� 11:01 |