Removing the freezer door
A few things to mention first.
•Make sure that you lift the door straight up so the hinges are not bent or broken.
•Be careful not to pinch the water tubing and wire harness on the door.
•Place doors on a protected surface to prevent scratching or damage.
1.Remove a screw on the upper hinge cover ( 1 ). With the door open, disengage the two locking tabs with a
1
3
4
2
2.Removing the FIXER HINGE ,and next take off the upper hinge.
Be careful that the door does not fall on you as you are removing it.
Be sure to keep track of all parts you are removing.
3.Next, remove the door from the lower hinge
( 5 ) by carefully lifting the door straight up ( 6 ).
6
5
Be careful not to pinch the water tubing and wire harness on the door.
Reattaching the freezer doors
To reattach the freezer doors, replace parts in reverse order.
Reattaching the Water Supply Line
1.The Water Line must be fully Inserted to the center of transparent coupler to prevent water leakage from the dispenser.
2.Insert the 2 clips in the install pack and check that each clip holds the line firmly.
Center of transparent coupler
Clip A (¼”) (6.35 mm)
Do not cut the water line.
Gently separate it from the coupler.
English - 10
13. 12. 4. |
��
7:12
