Samsung RSG309AARS/XAA manual Installing the Water Line, Connecting to the water supply line

Connecting to the water supply line

1.First, shut off the main water supply line and turn the ice-maker off.

2.Locate the nearest cold, drinking water line.

3.After connecting the water supply with water filter, turn on water supply and Flush 3 gallons through filter before use (flush approximately 6 minutes).

Cold water line

Water lineinstallation kit Pipe clamp

Shut off valve

INSTALLING THE WATER LINE

Connecting the water line to the Refrigerator.

There are several items that you need to purchase to complete this connection.

You may find these items sold as a kit at your local hardware store.

•	¼” compression nut	•	plastic tubing
•	copper tubing	•	ferrule

Refrigerator

		Plastic Tubing
		(Assembled)
Compression Nut
(1/4”) (Assembled)		Compression
		Fitting (Assembled)
Ferrule		Bulb
(Not supplied)
		Compression
		nut (B) (1/4”)
		(Not supplied)
Copper tubing	or	Plastic tubing (B)
(Not supplied)		(Not supplied)

Household water supply line

1. Connect the household water line to the assembled compression fitting.

-- If you are using copper tubing, slip the compression nut ( B ) (not included) and ferrule (not included) on copper tubing (not included) as shown.

-- If you are using plastic tubing ( B ), insert the molded end (Bulb) of the plastic tubing ( B ) into the compression fitting.

Do not use without the molded end (Bulb) CAUTION of the plastic tubing ( B ).

2.Tighten the compression nut ( B ) onto the compression fitting.

Do not over-tighten the compression nut ( B ).

3.Turn water on and check for any leakage.

Only connect the water line to a drinkable water source.

If you have to repair or disassemble the water line, cut off 1/4“ of the plastic tubing to make sure you get a snug, leak-free connection.

up 01setting

English - 13

DA68-02500B-13.indb 13 13. 12. 4.

�� 7:12