Samsung RSG309AARS/XAA manual Levelling the Refrigerator

Removing the Fridge Door

1.Remove a screw on the upper hinge cover ( 1 ). With the door open, disengage the two locking tabs with a flat-head screw driver ( 2 ) and remove it while the lifting up the rear of the cover ( 3 ), and then disconnect the wires by gently pulling them apart ( 4 ).

LEVELLING THE REFRIGERATOR

Now that the doors are back on the refrigerator, you want to make sure the refrigerator is level so that you can make final adjustments. If the refrigerator is not level, it will not be possible to get the doors perfectly even.

up

1

3

4

2

2.Removing the FIXER HINGE ,and next take off the upper hinge. Be careful that the door does not fall on you as you are removing it.

When the Freezer part is lower than the Fridge part.

Insert a flat-blade screwdriver into a slot on the Freezer Leg, then turn it clockwise.

Screw Driver Freezer Leg

01setting

Be sure to keep track of all parts you are removing.

3. Remove the door from the

lower hinge ( 5 ) by lifting 6 the door straight up ( 6 ).

5

Reattaching the Fridge door

To reattach the fridge doors, replace parts in reverse order.

When the Fridge part is lower than the Freezer part.

Insert a flat-blade screwdriver into a slot on the Fridge Leg, then turn it clockwise.

	Screw Driver
Fridge Leg

Refer to the next section for the best way to make very minor adjustments to the doors.

English - 11

DA68-02500B-13.indb 11 13. 12. 4.

�� 7:12