Samsung SCX-4100 specifications Exit Roller, Lsu

Disassembly and Reassembly

5.7 Exit Roller

1.Before you remove the Exit Roller you should remove:

-Rear Cover (see page 5-2)

-Side Covers (see page 5-3)

-Scanner Ass’y (see page 5-4)

-Middle Cover (see page 5-6)

2.Remove the white Exit Gear, and release a bearing clip at one end then remove the shaft and rollers as shown below.

Exit Gear

Bearing

Exit Roller

1

2

5.8 LSU

1. Before you remove the LSU you should remove: 3. Unplug 4 screws and take the LSU out.

- Rear Cover (see page 5-2)
- Side Covers (see page 5-3)	LSU
- Scanner Ass’y (see page 5-4)
- Middle Cover (see page 5-6)
2. Unplug 2 connector from the LSU.

Service Manual

5-10

Samsung Electronics