Alignment & Adjustments
6.7 Consumables and Replacement Parts
The cycle period outlined below is a general guideline for maintenance.
The example list is for an average usage of 50 transmitted and received documents per day. Environmental conditions and actual use will vary these factors.
The cycle period given below is for reference only.
COMPONENT | REPLACEMENT CYCLE | |
60,000 Pages |
| |
|
|
|
Paepr Feeding Roller(Friction Pad) | 60,000 Pages |
|
|
|
|
Transfer Roller | 60,000 Pages |
|
|
|
|
Fuser | 60,000 Pages |
|
|
|
|
Toner Cartridge | Original 1,000 Pages | Replacement 3,000 Pages |
|
|
|
6.8 The LCD Status Display by Each Error
LCD | Meaning | Solutions |
Door Open | The front or rear cover is not securely | Close the cover until it locks into place. |
| latched. |
|
|
|
|
[JAM 1] or | The toner cartrige is not installed. | Install the toner cartridge. |
[No Cartridge] |
|
|
|
|
|
Low Heat Error | There is a problem in the fuser unit. | Unplug the power cord and plug it back in. |
Open Heat Error |
| (Tech Mode Reference) |
|
| |
[Over Heat] |
|
|
|
|
|
[LSU Error] | A problem has occurred in the LSU | Unplug the power cord and plug it back in. |
| (Laser Scanning Unit). | (Tech Mode Reference) |
|
|
|
No Paper | The paper tray has run out of paper. | Load paper in the paper tray. |
[Add Paper] |
|
|
|
|
|
Paper Jam 0 | Paper has jammed in the feeding area of | Clear the jam. |
Open/Close Door | the paper tray. |
|
|
|
|
Paper Jam 1 | • Paper has jammed in the fuser area. | • Clear the jam. |
Open/Close Door | • A paper jam has occurred in the manual | • Clear the jam. |
| ||
| feeder or the machine detects non- |
|
| feeding from the manual feeder. |
|
|
|
|
Paper Jam 2 | Paper has jammed in the paper exit area. | Clear the jam. |
Check Inside |
|
|
|
|
|
Service Manual
Samsung Electronics
