Troubleshooting
7.6.2 The printer is not working (2)
• Description | After receiving the print command there is no response at all or print speed is low | ||
due to wrong setup of the environment rather than malfunction of the printer itself. | |||
| |||
|
|
| |
| Check and Cause | Solution | |
|
| ||
1. Ensure you have sufficient free hard disk space for the | 1. Not working with the message 'insufficient printer | ||
temporary work files created during printing. | memory' means there is a hard disk space problem | ||
|
| rather than a printer RAM problem. In this case pro- | |
|
| vide more space on the hard disk. Secure more | |
|
| space using the disk utilities program. | |
2. Printing error occurs even if there is enough space in | 2. The connection of the cable and printer port is not | ||
the hard disk. |
| correct. Check that the cable is properly connected | |
|
| and if you are using the parallel port check that the | |
|
| port settings in CMOS is correct. | |
3. Check the | 3. For the printer port, Select ECP. SPP and normal | ||
Setup. |
| normal modes support | |
|
| ECP Mode supports | |
4. Reboot the system to print. | 4. If the regular font is not printing, the cable or the | ||
|
| printer driver may be defective. | |
|
| Turn the PC and printer off, and reboot the system | |
|
| to print again. If not solved, | |
|
| in my computer If the regular fonts are not printed | |
|
| this time again. the cable must be defective so | |
|
| replace the cable with new one. | |
|
|
| |
Service Manual
Samsung Electronics
