Troubleshooting
7.6.3 Abnormal Printing
• Description
Printing does not work – even after replacing the cable Printer does not work at all or strange fonts are printed,
Check and Cause | Solution |
|
|
1. Set up the parallel port using CMOS SETUP. | 1. Ensure that ECP (best) or SPP is selected in the |
| CMOS (BIOS) setup. |
2. Printer Driver Error. | 2. Ensure that the correct driver is loaded. Use the |
| driver supplied on the CD or downloaded from the |
| Samsung web site. DO NOT use the Microsoft |
| driver supplied with the Windows operating system. |
| If the printer is a GDI or SPL type printer ensure that |
| ALL OTHER GDI or SPL drivers are uninstalled as |
| Windows allows only 1 of this type of driver to be |
| loaded. |
3. Error message “insufficient memory”. | 3. Delete any unnecessary files to secure enough |
(The printing job sometimes stops due to insufficient | space on the hard disk and start the print job again. |
virtual memory, this is caused by insufficient space on |
|
the hard disk.) |
|
|
|
Service Manual
Samsung Electronics
