C h a p t e r F i v e
THE ANSWERING MACHINE
In this chapter, you will learn how to check your TAD greeting message, monitor incoming calls, play and erase messages, and access your machine from a remote telephone.
Note: the SF3000T uses electronic momory as a recording medium.
Recording time is depending on the content of the message, the total recording time (TAD OGM + AUTO OGM + ICM) is about 12 minutes.
Checking Your TAD Greeting Message
For information about how to record your first TAD greeting message, see page 2.19.
1 | Play Erase OGM |
Press OGM.
ÃIf you have not yet recorded a TAD greeting message, an error appears in the display. You must record a TAD greeting message before you can set the machine to TAD mode.
The display shows the time when the message was recorded.
The display then counts down the time as the message is played back.
TIME:09-10 12:45
TAD OGM : 13s
To change a previously recorded greeting message, simply record a new one. Your machine automatically records the new message over the old one. For instructions, see page 2.19.
Monitoring an Incoming Call
1
When the call monitoring option is on and an incoming message is being recorded, you hear the callerÕs voice through the speaker.
2
If you want to speak to the caller, lift the handset.
ÃYou can turn off call monitoring. For more information, see page 7.10.
ÃThe machine stops recording the callerÕs message and you can speak directly to the caller.
CHAPTER FIVE : THE ANSWERING MACHINE 5.1
