THE ANSWERING MACHINE
4 | 1 | 2 | 3 | |
You can then enter another | ||||
|
|
| ||
command to perform | 4 | 5 | 6 | |
another operation, if you | ||||
|
|
| ||
choose. | 7 | 8 | 9 | |
| ||||
|
| 0 |
|
5 | 4 | 5 | 6 |
When you are ready to |
|
|
|
hang up, press #0 to finish | 7 | 8 | 9 |
the remote session. |
|
|
|
|
| 0 |
|
ÃIf you enter a remote code while another remote function is performing, the unit stops performing the current operation and performs the new operation.
ÃIf you donÕt enter Ô#0Õ, your machine might not hang up the line for several minutes.
Using Remote Commands
The remote operations you can perform and the commands for them are listed here.
#0 Exits from remote control mode.
#1 Changes the greeting message. After entering the command, speak into the handset. When you finish, press #1 again. If you run out of recording time, the machine stops and plays back the message.
#2 Plays back all messages. The machine beeps and plays all messages. If there are no messages, the machine beeps four times and waits for another command to be entered.
#3 Reserved
#4 Skips backward a message. The machine skips the current message and plays the previous one.
#5 Plays back new messages. The machine beeps and plays all new messages. If there are no new messages, the machine beeps four times and waits for another command to be entered.
#6 Skips forward a message. The machine skips the current message and plays the next one.
CHAPTER FIVE : THE ANSWERING MACHINE 5.7
