5
THE ANSWERING MACHINE
Call Transfer
You can set your machine to transfer an incoming calls to a specified location. When you use the call transfer feature, the machine operates as follows:
¥When a call comes in and the caller leaves a message, your machine automatically dials the telephone number you have specified as a Call Transfer destination.
¥When someone (maybe you) answers the call, your machine sends out beeps, for up to 55 seconds, and waits for the remote password to be entered. The remote password is preset to #139# at the factory.
¥If a correct password is entered while your machine sends out beeps, the machine plays the newly recorded message.
¥When the playback is complete, you hear a short beep. You can then enter another remote command to perform another operation, if you choose. See ÔUsing remote commandsÕ on page 5.7.
If there is no key input or the wrong password is entered while the machine sends out beeps, the machine releases the line.
Turning On or Off the Call Transfer Feature
1
Press Menu.
Menu | Resolution |
| |
Speed | Flash |
|
2
Press digit Ò3Ó or ¹ or repeatedly until Ô3.SYSTEM DATAÕ is displayed.
Rcv. Mode
Redial/ Pause
Volume/Scroll
3 | 2 |
|
|
| |
Press Start/Copy. |
| Start/ |
| 3 | Copy |
| 4 |
|
The display asks if you |
|
|
want to set a FAX or TAD | >FAX | :TAD |
option. |
|
|
ÃThe blinking > means the option is being selected.
5.4 CHAPTER FIVE : THE ANSWERING MACHINE
