Light Setting | Samsung SP-H700, SP-H500, SP-H710 manual

Light Setting

Used to set the image brightness by adjusting the amount of light generated by the lamp.

MENU
1
Select
2,3,4
…/†
2,3,4
EXIT
5

Setup

1	Press the MENU button.
	The main menu is displayed.

Press the ▲ or ▼ button to move to Setup.

2The Setup menu is displayed.

Press the button.

Press the ▲ or ▼ button to move to Light

3Setting, then press the button.

The Light Setting menu is displayed.

Press the ▲ or ▼ button to move to desired

4mode, then press the button.

Setup is switched to the selected mode.

5Press the EXIT button to exit the menu.

Light Setting Mode

Theater	Used to reduce the brightness of the lamp in dark
	ambient light to prevent reflection in the eye. It also
	lowers power consumption and extends the life of the
	lamp.

Bright	Used to enhance the brightness in relatively bright
	ambient light.

	Setup
Install		: Front-Floor	√
Light Setting		: Theater	√
V-Keystone			√
Test Pattern			√
PC			√
Factory Default			√
Information			√
Move	Enter	Return

Light Setting

Theater		√
Bright		√
Move	Enter	Return

Light Setting

45

Image 45

Samsung SP-H700, SP-H500, SP-H710 manual Light Setting

Contents

Owners Instructions SP-H700/H710/H500 Table of Contents Menu Option Table of Contents Features and Design Projector Lamp Page Preparation Front/Upper Side Accessories Projector and Accessories Indicator Information Rear Side and Cables Rear SideCables Keystone Remote Control Buttons Operating the Remote Control Inserting Batteries into Remote ControlOperating Move/Select Button Using Remote Control in Dark Place Light To Install the Projector Installation and Turning OnInstalling Projector on Backside of Screen Installing Projector in Front of the Screen Turning On Projector Using the Zoom Knob and the Focus Ring Zoom and Focus Adjustment Using Adjustable Feet Leveling with Adjustable Feet Using the Lens Shift Dial Using the Lens Shift Dial Screen Size and Projection Distance Screen Size and Projection Distance Connections and Source Setup Before Connections Check the following Before Connecting Viewing the picture Connecting to VCR/Camcorder/Cable Box Press the COMP.2 button to select Connecting to DVD Connecting to Video Equipment Connecting to the Digital TV Receiver Setting up the External Input Source Setting up the External Input Source Naming the External Connections Naming the External ConnectionsPage Selecting and Adjusting Color Picture Adjustment Selecting Picture Mode Selecting Picture Mode Custom Settings of the Picture Custom Settings of the Picture Changing the Color Standard Changing the Color Standard Selecting and Adjusting Color Temperature Selecting and Adjusting Color Temperature Gamma Correction Gamma Correction Settings Saving Custom Picture Settings Setting up DNIe Setting up DNIe Selecting Picture Size Selecting Picture Size Supported Picture Sizes Picture Adjustment Selecting Picture Size Screen Position Adjustment Screen Position Adjustment Film Mode Film Mode Overscan Overscan Still Picture Setup Flipping/Reversing the Projected Image Flipping/Reversing the Projected Image Light Setting Light Setting Correcting V-Keystone Correcting Vertical Keystone Test Pattern Menu Test Patterns Default Settings Restoring the Factory Default Settings Information InformationPage Menu Option Setting the Language Setting the Language Setting the Menu Position Setting the Menu Position Setting the Menu Translucency Setting the Menu Translucency Setting Up the Menu Display Time Setting Up the Menu Display Time Selecting the Quick Menu Selecting the Quick Menu Connecting to PC Display modes supported by this projector Before Connecting to PC Setting up the PC Environment Setting up the PC Environment Connecting to PC Using PC Video Cable or DVI CableViewing the PC Screen DVI-D Automatic Picture Adjustment Automatic Picture Adjustment Frequency Adjustment Frequency Adjustment Fine Tuning with the Phase Adjustment Fine Tuning with the Phase Adjustment Zooming the Screen Zooming the Screen Reset the PC Reset the PC Troubleshooting Menu and Remote Control Installation and Connection Screen and External Source Before Contacting Service PersonnelPage Other Information Cleaning the Projector and Lens Storage and MaintenanceCleaning the Inside of the Projector Storage and Maintenance Purchasing Optional Parts Optional PartsPurchasing Optional Parts Structure of Screen Menu Select Composite/S-Video/Component Input ModeButtons used for Screen Menu Structure of Screen Menu Setup Install Structure of Screen Menu Lamp Replacement Procedure Lamp Replacement Connecting the Projector to a PC Transmission Sequence and Data FormatControl RS-232C Connection and Control Commands Specifications Specifications Remote Control Specifications Remote Control Specifications Memo Memo Europe Only