Connecting to the Digital TV Receiver | Samsung SP-H500, SP-H700

CONNECTING TO VIDEO EQUIPMENT

Connecting to the Digital TV Receiver

Rear side of Projector

DVI Video Cable

Component Cable

or

Digital TV Receiver

(Set-Top Box)

PC Video Cable

Connections and Source Setup

Rear Connection

1signal input terminal of the receiver.Connect antenna cable to antenna

	Connect COMPONENT1 or
	COMPONENT2 (Y/Pb/Pr) port of the
2	projector to Component port of the
2	receiver using Component Cable.

■ If the receiver has DVI or PC OUT port, you can connect it to DVI or PC input port of the projector.

Connecting to Video Equipment

Viewing the picture

COMP.1	1 Turn on the projector and press the COMP.1	Component1
1	button to select Component1.
COMP.2
2	2 Press the COMP.2 button to select
PC	2 Press the COMP.2 button to select
PC	Component2 if COMPONENT2 is connected.
DVI	If the receiver is connected to DVI or PC port,
	If the receiver is connected to DVI or PC port,
	press the DVI or PC button to select DVI or PC	DVI
	respectively.

■ When Component Mode is not available, check that the component cables are in place.

25

Image 25

Samsung SP-H500, SP-H700, SP-H710 manual Connecting to the Digital TV Receiver, Connecting to Video Equipment

Contents

Owners Instructions SP-H700/H710/H500 Table of Contents Menu Option Table of Contents Features and Design Projector Lamp Page Preparation Front/Upper Side Accessories Projector and Accessories Indicator Information Rear Side Rear Side and CablesCables Keystone Remote Control Buttons Inserting Batteries into Remote Control Operating the Remote ControlOperating Move/Select Button Using Remote Control in Dark Place Light To Install the Projector Installation and Turning OnInstalling Projector on Backside of Screen Installing Projector in Front of the Screen Turning On Projector Using the Zoom Knob and the Focus Ring Zoom and Focus Adjustment Using Adjustable Feet Leveling with Adjustable Feet Using the Lens Shift Dial Using the Lens Shift Dial Screen Size and Projection Distance Screen Size and Projection Distance Connections and Source Setup Before Connections Check the following Before Connecting Viewing the picture Connecting to VCR/Camcorder/Cable Box Press the COMP.2 button to select Connecting to DVD Connecting to Video Equipment Connecting to the Digital TV Receiver Setting up the External Input Source Setting up the External Input Source Naming the External Connections Naming the External ConnectionsPage Selecting and Adjusting Color Picture Adjustment Selecting Picture Mode Selecting Picture Mode Custom Settings of the Picture Custom Settings of the Picture Changing the Color Standard Changing the Color Standard Selecting and Adjusting Color Temperature Selecting and Adjusting Color Temperature Gamma Correction Gamma Correction Settings Saving Custom Picture Settings Setting up DNIe Setting up DNIe Selecting Picture Size Selecting Picture Size Supported Picture Sizes Picture Adjustment Selecting Picture Size Screen Position Adjustment Screen Position Adjustment Film Mode Film Mode Overscan Overscan Still Picture Setup Flipping/Reversing the Projected Image Flipping/Reversing the Projected Image Light Setting Light Setting Correcting V-Keystone Correcting Vertical Keystone Test Pattern Menu Test Patterns Default Settings Restoring the Factory Default Settings Information InformationPage Menu Option Setting the Language Setting the Language Setting the Menu Position Setting the Menu Position Setting the Menu Translucency Setting the Menu Translucency Setting Up the Menu Display Time Setting Up the Menu Display Time Selecting the Quick Menu Selecting the Quick Menu Connecting to PC Display modes supported by this projector Before Connecting to PC Setting up the PC Environment Setting up the PC Environment Using PC Video Cable or DVI Cable Connecting to PCViewing the PC Screen DVI-D Automatic Picture Adjustment Automatic Picture Adjustment Frequency Adjustment Frequency Adjustment Fine Tuning with the Phase Adjustment Fine Tuning with the Phase Adjustment Zooming the Screen Zooming the Screen Reset the PC Reset the PC Troubleshooting Menu and Remote Control Installation and Connection Screen and External Source Before Contacting Service PersonnelPage Other Information Cleaning the Projector and Lens Storage and MaintenanceCleaning the Inside of the Projector Storage and Maintenance Optional Parts Purchasing Optional PartsPurchasing Optional Parts Structure of Screen Menu Select Composite/S-Video/Component Input ModeButtons used for Screen Menu Structure of Screen Menu Setup Install Structure of Screen Menu Lamp Replacement Procedure Lamp Replacement Transmission Sequence and Data Format Connecting the Projector to a PCControl RS-232C Connection and Control Commands Specifications Specifications Remote Control Specifications Remote Control Specifications Memo Memo Europe Only