2.Tap the Menu Launcher icon .

3.Tap Record. Select one of the following:

The Beam command for a single record.

In the Address Book, Beam Business Card, Beam Category.

4.When the Beam Status dialog box is displayed, point the IR port directly at the IR port of the other device.

Note: For best results, your phone should be approximately four and 40 inches apart.

5.Wait for the Beam Status dialog box to indicate that the transfer is complete.

To Beam an Application

1.Tap the Applications Launcher .

2.Tap the Menu Launcher .

3.Select App and tap Beam.

4.Tap the Application to send.

Note: Some applications are copyright protected and cannot be beamed to another device. These applications are indicated with a lock icon.

5.Tap Beam.

6.When the Beam Status dialog box is displayed, point the IR port directly at the IR port of the other device.

7.Wait for the Beam Status dialog box to indicate that the transfer is complete.

Receiving Beamed Information

Before you can receive beamed information, the beam receive function must be ON.

To make sure the beam setting is ON:

1.Tap the Applications Launcher .

2.Tap the Preferences icon .

3.Tap the drop down menu and select General.

Section 2: Understanding Your Phone

2P: Managing Handheld Computer Software 147

Page 151
Image 151
Samsung SPH-I330 manual To Beam an Application, Receiving Beamed Information