RS-232C 9-pin connector layout | Sanyo RD2QD/NA, DTL-4800 guide

SETUP FOR RS-232C OR RS-485 USE

RS-232C 9-pin connector layout						Pin	Signal	Operation	Signal direction
1			5			number	Signal	Operation	Signal direction
1			5			number

						2	RXD	Receive	VCR ← Computer
								Receive
								data
								data

6			9			3	TXD	Send data	VCR → Computer

						7	RTS	Request	VCR → Computer
						7	RTS	to send	VCR → Computer
								to send

						5	GND	Signal
						5	GND	ground
								ground

						The signal transmission is compatible with RS-232C
						specifications.

CHECKING POWER FAILURE, FAILURE DUE TO CONDENSATION AND USAGE DURATION

1Press the MENU button to display the (MAIN MENU 1) menu.

2Press the SHIFT ] (or \) button until the (MAIN MENU 2) menu is displayed.

3Press the SHIFT ] (or \) button to select the “3. POWER/DEW/USED TIME” line, then press the MENU button.

ø The (POWER/DEW/USED TIME) menu appears.

Example

@@@@@<POWER@FAILURE>

002@FAILURE@@12-25@07:15

@@@@RECOVERY@12-25@07:30

@@@@@@@@@@<DEW>

001@FAILURE@@12-25@11:00

@@@@RECOVERY@12-25@12:00

@@@@@@@<USED@TIME>

VIDEO@@@@@@@@@@@00003H

POWER@@@@@@@@@@@00007H

4Press the MENU EXIT button, the normal screen is displayed.

NOTE:

œIf the MENU RESET button is pressed while the “POWER FAILURE” and “DEW” data is displayed, the

data is erased. The “USED TIME” data cannot be reset. “@” will be erased from the digital display.

POWER FAILURE . . . . The number of power failures, and the date and time of the most recent power failure and recovery are displayed.

DEW. . . . . . . . . . . . . . . The number of failures due to condensation, and the date and time of the most recent failure and recovery are displayed.

USED TIME . . . . . . . . . The video heads usage duration and the power on duration are displayed.

48

English

Image 49

Sanyo RD2QD/NA RS-232C 9-pin connector layout, Pin Signal Operation Signal direction, POWER/DEW/USED Time menu appears

Contents

Digital For the customers in Canada PrecautionsDeclaration of Conformity Precautions Features ContentsAccessories Front Panel Locations of Controls and IndicatorsSTILL/PAUSE button Search FRAME/FIELD button Eject button Menu Exit button Operation Indicators Locations of Controls and IndicatorsOperation Mode Indicator Digital Display OFF indicator Male on the VCR Back Panel O P Q R S T Protection against power failure Installing the Ni-Cd BatteryConnections About the memory reset Power Cord InstallationConnections Main menus ON-SCREEN MenusSub-menus ON-SCREEN Menus Language Setting Setting the Language and ClockClock Setting Day of week is set automatically Automatic Daylight Saving Time Adjustment Setting the Language and Clock Selecting the On-screen Display Changing the ON-SCREEN DisplayChanging the Date/Time Display Position Video Cassette Tapes Video Cassette Tapes Setting the Action to Take When a Cassette is LoadedCorrect tape thread check function Various SET 1 menu appears Operation Tape Management FunctionIf no tape management data is present on the tape If tape management data is present on the tape Tape Management Function Setting the Tape Management FunctionTape Management menu appears Conflict display sample Tape Management Conflict Display Pause/Still indicator N blinks Recording speed mode is displayed on the digital displayNormal Recording Normal Recording Before starting Normal Recording Recording Speed ModeField Hour Recording Check Concerning the Number of Times Tapes can be Rerecorded onClog Detection Action to Take when the Video Signal Deteriorates Setting the Mode at the End of the TapeRecord SET menu appears Setup for use with a multiplexer Changes to the Recording Speed Mode During Recording Autorepeat Recording Repeat indicator will lightAutorepeat Recording Alarm Recording Setting Alarm Recording Alarm Recording Counter Display Alarm RecordingConnections to the Alarm IN/OUT Terminals Alarm Reset in terminal Alarm Scan Alarm Search Post Alarm Recording Setting Pre Alarm Recording SettingRecording speed mode Recording duration Seconds Program Timer Recording Press the Data l or j button to select Y Program Timer Recording Changing a Program Timer Recording Setting the HolidaysTo Cancel a Program Timer Recording To Cancel all Program Timer Recordings These portions will not be recorded Recording Using AN External Timer Input Trigger Shot Recording Setup Connections Using a MultiplexerTrigger Shot Recording Recording will start in series recording mode Series Recording SetupSeries Recording Series recording connections Series Recording Continous Loop Recording SetupLoop recording connection example with 2 VCRs Playback Playback Tape CounterSearch Forward and Reverse Field Advance Forward and Reverse Day/Time Search DAY/TIME SearchD Search 01 000000 will be displayed on screen Setting the Security Lock Setting the Security LockCancel the Security Lock Setting and Canceling the Quick Method Security Lock If using the SET UP setting, continue with steps 4 Setting the BuzzerBuzzer SET menu appears Setting procedure on the first VCR is now completed Clock Adjustment Cassette Eject Setup Setting the Cassette Eject ModeEject terminal connection Eject in terminal DIP Switches Setup Setup for RS-232C or RS-485 USESW No Example Setup for RS-232C or RS-485 Use Setup for RS-232C or RS-485 USERS-485 RJ-11 connector layout RS-485 Connection Pin Signal Operation Signal direction RS-232C 9-pin connector layoutPOWER/DEW/USED Time menu appears Output Terminals Timer OUT TerminalTape END OUT Terminal COM Terminal Output Terminals Remote control settingRemote Jack NON REC OUT terminal Maintenance Maintenance Table MaintenanceMaintaining and Checking The Mechanism After a Power Failure Troubleshooting GuideSystem Down Specifications Weekdays 830 AM 500 PM Pacific Time Sanyo Industrial VCR Warranty RD2QD/NA