Sanyo PDG-DWL2500 owner manual Computer Input Image Adjustment, Image adjust Menu

Computer Input

Image Adjustment

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ed buttons to select Image
	adjust and then press the Point 8 or the SELECT
	button.
2	Use the Point ed buttons select the desired item
	and then press the SELECT button to display the

adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value.

Contrast

Press the Point 7 button to decrease the contrast; press the Point 8 button to increase the contrast (from 0 to 63).

Brightness

Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63).

Color temp..

Use the Point 7 8 buttons to select the desired Color temp. level (XLow, Low, Mid, or High).

White balance (Red / Green / Blue)

Press the Point 7 button to lighten R/G/B tone; press the Point 8 button to deepen R/G/B tone (from 0 to 63).

Sharpness

Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 15).

Gamma

Use the Point 7 8 buttons to adjust the gamma value to obtain a better balance of contrast (Default, 1..8, 2..0, 2..2, 2.4, or 2..6).

Reset

To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures.

Store

To store the adjusted data, select Store and press the Point

8or the SELECT button. Use the Point ed buttons to select one from Image 1 to 4 and press the SELECT button. A confirmation box appears and then select Yes. Stored data can be called up by selecting an Image (1-4)in the Image Mode Selection on page 36.

Image adjust Menu

Selected Image mode

Use the Point 7 8 buttons to adjust the setting value.

4Note:

•When White balance Red, Green or Blue is adjusted, Color temp. will change to User.

Store Menu

A confirmation box appears and then select Yes..

37