Computer Input

Input Source Selection (Computer 1: RGB)

Direct Operation

Choose Computer 1(RGB) by pressing the COMPUTER 1

Remote Control

 

button on the remote control.

 

Before using these buttons, correct input source should be

COMPUTER 1 button

selected through Menu operation as described below.

 

 

Computer 1(RGB)

 

Computer 1(Scart)

Input Menu

1

2

3

Menu Operation

Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select Input and then press the Point 8 or the SELECT button.

Use the Point ed buttons to select Computer 1.

When Computer 1 is selected, press the Point 8 to access the submenu items. Use the Point ed buttons to select the RGB input source and then press the SELECT button.

Computer

1

4Note:

When the Input Search function is set to On 1 or On 2 in the Auto setup function, the input signal will be searched automatically (p.51).

30

Page 30
Image 30
Sanyo PDG-DWL2500 owner manual Computer Input, Input Source Selection Computer 1 RGB, Input Menu