Sanyo PDG-DWL2500 owner manual Computer Input Auto PC adjustment, PC adjust Menu

Computer Input

Auto PC adjustment

Auto PC adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal , Vertical and Clamp position to conform to your computer.

	Menu Operation
Auto PC adj..
1	Press the MENU button to display the On-Screen
	Menu. Use the Point ed buttons to select PC adjust
	and then press the Point 8 or the SELECT button.
2	Use the Point ed buttons to select Auto PC adj.. and
	then press the SELECT button.

To store adjustment parameters

The adjusted parameters from the Auto PC adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode (1–10)in the PC System Menu (See page 32). See also “Store” on page 35.

4Note:

•Fine sync, Total dots, Horizontal and Vertical position of some computers can not be fully adjusted with the Auto PC adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.34-35).

•The Auto PC adjustment can not be operated when 480i, 575i, 480p, 575p, 720p or 1080i is selected in the PC System Menu (p.32) , or when the signal is coming from the HDMI terminal.

PC adjust Menu

Use Point ed buttons to select Auto PC adj.. and press the SELECT button. Please wait.... . appears while the Auto PC

adjustment is in process.

33