Sanyo PDG-DWL2500 owner manual 3D setting

Setting

3D setting

This function is used to set the 3D display function. (pp.48-		3D setting
49) Press the Point ed buttons to switch between each
option.
3D	Set to "On" to activate the 3D display function
	and the 3D indicator turns blue.

3D sync....If you see a discrete or overlapping image, 3D Sync Invert function* enables you to get the correct image. Switch the 3D sync signal to 1 or 2.

3D->2D......When viewing the 3D contents without wearing

the 3D glasses, set to "On" to convert 3D display format to 2D display format.

3D phase...Adjust the phase of the 3D sync signal when the 3D SYNC OUT terminal is used. (0 - 31)

*The Frame Sequential Format is a technology that rapidly alternates between left-eye and right-eye images. When right-eye image and left-eye image are switched or you feel like you cannot get 3D effect due to out-of- synchronization state, first try to synchronize the projector with the 3D glasses by using 3D SYNC function.

Zoom

This function is used to memorize the Zoom adjustment with the ZOOM +/- buttons on the top control (p.25).

Press the Point ed buttons to select Reset, Store1 or Store2.

Reset . .Reset the Zoom adjustment when the projector is turned off or the AC power cord is unplugged.

Store1 . Store the Zoom setting even when the projector is turned off. Zoom setting is cleared when the AC power cord is unplugged.

Store2 . Store the Zoom setting even when the AC power cord is unplugged.

52