Sanyo PDG-DWL2500 No Show button, Timer button, Image button, Screen button, Remote Control

Basic Operation

NO SHOW button

Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When the projected image is captured and is set as User in the Logo selection (p.53), the screen changes each time you press the NO SHOW button as follows.

black out a the captured image a normal a • • • • •

4Note:

When use the MUTE button to release the No Show function, the mute function can not be operated at the same time.

P-TIMER button

Press the P-TIMER button on the remote control. The Timer display “00 : 00” appears on the screen and starts to count time (00 : 00–59 : 59).

To stop the P-TIMER, press the P-TIMER button.

To cancel the P-TIMER, press the P-TIMER button again.

IMAGE button

Press the IMAGE button on the remote control to select a desired image mode of the screen. See page 36 for details.

SCREEN button

Select the screen size (See pages 38-40, 46-47 for details).

Remote Control

SCREEN button

P-TIMER button NO SHOW button

IMAGE button

4Note:

See the previous page for the description of other buttons.

No Show

No show disappears after 4 seconds.

P-Timer

29