Installation

Positioning the Projector

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen.

Note:

The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image.

All measurements are approximate and may vary from the actual sizes.

41.8' (12.7 m)

34.8' (10.6 m)

23.2' (7.1 m)

17.4' (5.3 m)

11.6' (3.5 m)

4.6' (1.4 m)

Screen Size

 

 

100"

150"

200"

300"

 

40"

 

(W x H) mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 : 3 aspect ratio

 

813 x 610

 

2032 x 1524

3048 x 2286

4064 x 3048

6096 x 4572

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Zoom (max)

 

4.6' (1.4 m)

 

11.6' (3.5 m)

17.4' (5.3 m)

23.2' (7.1 m)

34.8' (10.6 m)

 

 

 

 

 

 

 

 

Zoom (min)

 

5.5' (1.7 m)

 

13.9' (4.2 m)

20.9' (6.4 m)

27.8' (8.5 m)

41.8' (12.7 m)

 

 

 

 

 

 

 

 

Adjustable Feet

Projection angle can be adjusted up to 10.0 degrees with the adjustable feet.

1

Lift the front of the projector and press the feet lock

 

 

latches on both side of the projector.

 

 

2

Release the feet lock latches to lock the adjustable feet

 

 

and rotate the adjustable feet to a proper height and tilt.

 

 

3

To retract the adjustable feet, lift the front of the projector

 

 

and push and undo the feet lock latches.

 

 

 

Keystone distortion of the projected image can be

 

 

 

corrected with the remote control or menu operation.

 

 

 

(pp.23, 45-46)

Adjustable Feet

Feet Lock Latches

 

 

13

Page 13
Image 13
Sanyo PLC-XC56 owner manual Installation, Positioning the Projector, Adjustable Feet