Sanyo PLC-XC56 Video Input Video System Selection, Video or S-video, Component, Auto, Note

Video Input

Video System Selection

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input and
	then press the Point ► or the SELECT buttons.
2	Use the Point ▲▼ buttons to select Video or S-video
	or Computer 1(Component) and then press the
	SELECT button.
3	Use the Point ▲▼ buttons to select System and then
	press the Point ► or the SELECT button. Use the Point

▲▼ buttons to select the desired system and then press the SELECT button.

Video or S-video

Auto

The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-Mor PAL-N, select the system manually.

PAL/SECAM/NTSC/NTSC4..43/PAL-M/PAL-N

If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4..43, PAL-M, and PAL-N.

Component

Auto

The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.

COMPONENT VIDEO SIGNAL FORMAT

If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i.

AV System Menu (Video or S-video)

RGB(PC digital)

System Video

AV System Menu (Component)

Component

RGB(PC digital)

Component

Note:

The AV System Menu cannot be selected when selecting

RGB (Scart).

39