Sanyo PLC-XC56 owner manual Use the Point buttons to select Computer 2

Computer Input

Input Source Selection (RGB(PC digital), RGB(AV HDCP))

Direct Operation

Choose Computer 2 (PC digital) or Computer 2 (AV HDCP) by pressing the INPUT button on the top control or press the COMPUTER 2 button on the remote control.

Before using INPUT button, correct input source should be selected through Menu operation as described below.

Remote Control

COMPUTER 2 button

Computer 2 (PC digital)

Computer 2 (AV HDCP)

Computer 2 (Analog)

	Menu Operation
1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input and
	then press the Point ► or the SELECT button.
2	Use the Point ▲▼ buttons to select Computer 2 and
	then press the Point ► button.
3	Use the Point ▲▼ buttons to select RGB(PC digital)
	or RGB(AV HDCP) and then press the SELECT

button.

Top Control

INPUT button

Input Menu

Computer 1 ( RGB)

/(Component) / (Scart)

Computer 2 (PC digital) /

(AV HDCP) /

(Analog)

Video

S-video

RGB(PC digital)

NTSC

Note:

•When the Input Search function is set to On1 or On2, the input signal will be searched automatically (p.45).

•HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital entertainment content delivered by DVI (Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.

Computer

2

28