Sanyo PLC-XC56 owner manual Projector Condition

Appendix

		Indicators
POWER		WARNING	WARNING	LAMP	Projector Condition
red/green		TEMP.	FILTER	REPLACE
		red	orange	yellow
					The projector has been cooled down enough and the
					temperature returns to normal. When turning on the
red					projector, the WARNING TEMP. indicator stops blinking.
					Check and replace the filter.
					The lamp has been used overtime. Replace the lamp
Any					immediately and then reset the lamp counter. The indicator
				yellow	will be turned off after resetting the counter.
Any					If the Filter counter reached a time set in the timer setting,
					a Filter replacement icon (Fig.2) appears on the screen
			orange		and the WARNING FILTER indicator on the top control
					lights up. Replace the filter as soon as possible. If the
					filter is out of scroll and the projector reaches a time set
					in the timer setting, Fig. 3 appears on the screen and
					the WARNING FILTER indicator lights up. Replace the
Fig.2	Filter replacement icon				filter cartridge as soon as possible.If the filter is clogged
					and no scroll is left in the filter cartridge, a Filter cartridge
					replacement icon (Fig.4) appears on the screen and the
					WARNING FILTER indicator lights up. Replace the filter
					cartridge as soon as possible.
Fig.3	Filter cartridge replacement icon				Note:
					Fig.2, Fig.3 and Fig.4 icon will not appear when the
					Display function is set to “Off” (p.46), during “Freeze”
Fig.4	Filter cartridge replacement icon				(p.25), or “No show” (p.26).
					The filter cartridge is not installed in the projector.
					Check the filter compartment to see if the filter cartridge
					is installed in the projector. When the filter cartridge is
			blinking fast	blinking fast	installed and the indicators continue to light and blink, read
			orange	yellow	the column below.
					The projector detects an abnormal condition and cannot
					be turned on. Unplug the AC power cord and plug it again
					to turn on the projector. If the projector is turned off again,
					unplug the AC power cord and contact the dealer or the
					service center. Do not leave the projector on. It may cause
					an electric shock or a fire hazard.

When the filter detects clogging, reaches a time set in the timer setting or runs out of the filter scroll, the WARNING FILTER indicator lights orange. When this indicator lights orange, replace the filter or the filter cartridge with a new one promptly. Reset the Filter counter and Scroll counter after replacing the filter cartridge (p.62).

When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp counter after replacing the lamp (p.65).

73