Sanyo PLC-XC56 Computer Input, Input Source Selection RGB Computer 1/Computer 2Analog, Note

Computer Input

Input Source Selection (RGB: Computer 1/Computer 2(Analog))

Direct Operation

Choose either Computer 1(RGB) or Computer 1(Scart) or Computer 2(Analog) by pressing the INPUT button on the top control or press the COMPUTER 1 button or Computer 2 on the remote control.

Before using INPUT button, correct input source should be selected through Menu operation as described below.

Remote Control

COMPUTER 1 button

			Computer 1(RGB)
			Computer 1(Scart)
		COMPUTER 2 button
			Computer 2 (PC digital)
			Computer 2 (AV HDCP)
			Computer 2 (Analog)
	Menu Operation
1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input and
	then press the Point ►or the SELECT button.
2	Use the Point ▲▼ buttons to select Computer 1.
3	When Computer 1 is selected, press the Point ►
	button to access the submenu items. Use the Point ▲

Top Control

INPUT button

Input Menu

Computer 1 ( RGB)

/(Component) / (Scart)

Computer 2 (PC digital) /

(AV HDCP) /

(Analog)

Video

S-video

RGB(PC digital)

NTSC

▼buttons to select the RGB input source and then press the SELECT button.

RGB(PC digital)

Computer 1

Note:

When the Input Search function is set to On1 or On2 in the Auto setup function, the input signal will be searched automatically (p.45).

27