Sanyo PLC-XU106K owner manual Part Names and Functions Rear Terminal, ⑤ LAN Connection Terminal

Part Names and Functions

Rear Terminal

		③	④	⑤
①	②

⑩ ⑨ ⑧ ⑦ ⑥

①CONTROL PORT

When the projector is controlled by a computer, connect to this jack with serial control cable.

②COMPUTER IN 1 / COMPONENT IN

Connect output signal from a computer, RGB scart 21-pin video output or component video output to this terminal (pp.15,17).

③MONITOR OUT

This terminal can be used to output the incoming RGB signal from COMPUTER IN 1/COMPONENT IN terminal or COMPUTER IN 2 to the other monitor (pp.15,17).

④COMPUTER IN 2

Connect computer output to this terminal (p.15).

⑤LAN Connection Terminal

Connect the LAN cable (refer to the owner’s manual of "Network Set-up and Operation").

⑥S-VIDEO IN

Connect the S-VIDEO output signal from video equipment to this jack (p.16).

⑦AUDIO OUT (VARIABLE)

Connect an external audio amplifier to this jack (pp.15-17).

This terminal outputs sound from AUDIO IN terminal (⑧ or ⑨).

⑧COMPUTER 1 (COMPONENT) / COMPUTER 2 AUDIO IN

Connect the audio output (stereo) from a computer or video equipment connected to ② or ④ to this jack (pp.15,17).

⑨AUDIO IN

Connect the audio output signal from video equipment connected to ⑥ or ⑩ to this jack.

For a mono audio signal (a single audio jack), connect it to the L (MONO) jack (p.16).

⑩VIDEO IN

Connect the composite video output signal to this jack (p.16).

10