Sanyo PLC-XU106K owner manual Video Input, Input Source Selection Video, S-video, Input Menu

Video Input

Input Source Selection (Video, S-video)

Direct Operation

Choose Video or S-videoby pressing the INPUT button on the top control, or the VIDEO button or the S-VIDEO button on the remote control.

Top Control	INPUT button
	Computer 1(RGB) /
	(Component) / (Scart)
	Computer 2(RGB)
	Video
	S-video

Remote Control

VIDEO button

Video

S-video button

S-video

Menu Operation

1	Press the MENU button to display the On-Screen			Input Menu
	Menu. Use the Point ▲▼ buttons to select Input and
2	then press the Point ► or the SELECT button.
	Use the Point	▲▼	buttons to select either Video or

S-videoand then press the SELECT button.

Video

S-video

When video input signal is connected to the VIDEO jack, select Video.

When video input signal is connected to the S- VIDEO jack, select S-video.

Note:

When the Input Search function is set to On 1 or On 2 in the Auto setup function, the input signal will be searched automatically (p.47).

39