Sanyo PLC-XU106K owner manual Input Menu, Component RGB Scart Note

Video Input

Input Source Selection (Component, RGB Scart 21-pin)

Direct Operation

Choose Computer 1(Component) or Computer 1(Scart) by pressing the INPUT button on the top control or pressing the COMPUTER 1 or the COMPONENT button on the remote control.

Before using INPUT button, correct input source should be selected through Menu operation as described below.

Remote Control Top Control

COMPUTER 1 button

Computer 1 (RGB)

Computer 1 (Scart)

COMPONENT button

Computer 1

(Component)

Menu Operation

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input and
	then press the Point ► or the SELECT button.
2	Use the Point ▲▼ buttons to select Computer 1 and
	then press the Point ► button.
3	Use the Point ▲▼ buttons to select Component or
	RGB(Scart) and then press the SELECT button.

INPUT button

Computer 1(RGB) / (Component) / (Scart)

Computer 2(RGB)

Video

S-video

Input Menu

Component

RGB (Scart)

Note:

When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Component-VGA Cable, select Component.

When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Scart- VGA Cable, select RGB (Scart).

When the Input Search function is set to On 1 or On 2 in the Auto setup function, the input signal will be searched automatically (p.47).

40