Sanyo PLC-XU106K owner manual Basic Operation Menu Bar

Basic Operation

Menu Bar

For detailed functions of each menu, see “Menu Tree” on pages 69-70.

Main Menu Sub-Menu

①

②

③

④

⑤

⑥

⑦

⑧

⑨

⑩

①Input

Used to select an input source from Computer 1, Computer 2, Video or S-video. (pp.29-30,39-40)

②PC adjust

Select Auto PC adj.., Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area H and Display area V to adjust the parameters to match with the PC input signal format. (pp.32-34)

③Image select

For computer source, used to select an image mode from among Dynamic, Standard, Real, Blackboard(Green), Colorboard and image 1 - 4. (p.35)

For Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green), Colorboard and Image 1- 4. (p.42)

④Image adjust

For computer source, used to adjust computer image [Contrast, Brightness, Color temp.., White balance (R/G/B), Sharpness and Gamma]. (pp.36-37)

For Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp.., White balance (R/G/ B), Sharpness, Gamma, Noise reduction and Progressive]. (pp.43-44)

⑤Screen

For computer source, used to adjust size of the image [ Normal, True, Wide, Full, Custom and Digital zoom +/– ]. (pp.37-38)

For Video source, used to set size of image [Normal, Wide and Custom]. (p.45)

⑥Sound

Used to adjust the volume or mute the sound. (p.26)

⑦Setting

Used to set the projector’s operating configurations. (pp.46-58)

⑧Information

Display the input source information: Input , H-sync freq.., V-sync freq.., Screen, Language, Lamp status, Lamp counter, Power management, Key lock, PIN code lock and Remote control.. (p.59)

⑨Network

See owner’s manual of “Network Set-up and Operation”.

⑩Guide

The key operation is displayed.

23