Sanyo PLC-XU106K Computer Input Computer System Selection, Selecting Computer System Manually

Computer Input

Computer System Selection

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 72.)

One of the following messages may appear when:

	The projector cannot recognize the connected
Auto
	signal conforming to the provided PC Systems.
	Auto is displayed on the System Menu box and
	the Auto PC adjustment function works to display
	proper images. If the image is not projected
	properly, a manual adjustment is required.
	(pp.33-34)

-----There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on page 66.)

	The preset system is manually adjusted in the
Mode 1
	PC adjust Menu. The adjusted data can be
	stored in Mode 1-5. (pp.33-34)
	PC Systems provided in this projector is chosen.
SVGA 1
	The projector chooses a proper system provided
	in the projector and displays it.

*Mode 1 and SVGA 1 are examples.

Selecting Computer System Manually

PC system can also be selected manually.

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input and
	then press the Point ► or the SELECT button.
2	Use the Point ▲▼ buttons to select System and then
	press the Point ► or the SELECT button.
3	Use the Point ▲▼ buttons to select the desired system
	and then press the SELECT button.

PC System Menu

The PC System Menu Selected system is displayed.

	Customized Mode
	(1–5)set in the
	PC adjust Menu
PC System Menu	(pp.33-34).

Systems in this dialog box

can be selected.

31